Model XO5183-XXX Oven Controlled Crystal Oscillator
Electrical Specifications
Nominal Frequency (FO): 10.0 MHz (available from 10 MHz to 120 MHz) Frequency Stability (for 10 MHz) vs. temperature, < 10ppb vs. Power Supply (5%), <2ppb vs. Load (10%), <2ppb vs. time after 30 days continuous operation < 1ppb/day < 100ppb first year < 500ppb for 10 years Frequency Adjustment Method, external voltage, 0VDC to +4VDC Range,: sufficient for > 10-years aging adjustment Modulation bandwidth, >1KHz Slope, Positive Output - Sinewave (HCMOS Available) Level, > +3dBm Load, 50, 10% Harmonics: < -30dBc Warm Up Time @ 25C To within 0.1ppm of final frequency, <2.0 minutes SSB Phase Noise (maximum for 10 MHz) -90dBc/Hz @ 1Hz offset -120dBc/Hz @ 10Hz offset -140dBc/Hz @ 100Hz offset -150dBc/Hz @ 1kHz offset -150dBc/Hz @ 10kHz offset Oscillator Disable (TTL/CMOS Level Input) LOW (or Floating),: Oscillator ENABLED HIGH, Oscillator DISABLED Oven Ready (Open Collector Output) LOW, oven NOT ready (3mA sink, maximum) HIGH, oven ready Power Supply Voltage: +5.0VDC 5% (available from +5V to +15V) Power Consumption <4W during warm up <1.25W steady state at 25C Operating Temperature Range: 0C to +70C (available from -40C to 85C)
Revised: April 15, 2005
Consult the Factory with your specific requirements.
Page 1 of 1
MtronPTI, Inc. - 2525 Shader Road - Orlando - Florida - 32804-2780 Telephone: 407-298-2000 Fax: 407-293-2979 E-mail: Sales@mtronpti.com
|
